滨州LYW-...G Series Passive Signal Isolator
Application 1: Receive the current signal output from the four-wire transmitter on-site, isolate it, and then output it to the system;
Application 2: Alternatively, receive the current signal output by the system, isolate it, and then send it to the field-mounted valve positioner or electrical converter.
In both application modes, the energy consumption during operation comes entirely from the input circuit.
Category:
Product Description
Product Overview Product overview
The LYW series passive signal isolators require no external power supply and are primarily designed to provide electrical isolation between transmitters and the connected instruments or devices, safeguarding the transmitter in the process. They effectively address potential issues arising from signal interconnections while significantly enhancing the system's resistance to interference.
Performance metrics TECHNICAL PARAMETERS
On-site side output: 4-20mA
Load resistance: 0–550 Ω
System-side input: 4–20mA
Input terminal voltage: Normal, U ≤ (Uo + 3)
Maximum input voltage: Ui ≤ 18 VDC
Maximum input current: ≤30mA
Output accuracy: 0.1% F.S.
Temperature drift: 0.01% F.S./°C
Response time: 20ms to reach 90% of the final value
Electromagnetic Compatibility: Complies with IEC 61326-1, IEC 61326-3-1
Operating environment temperature: -20°C to +60°C
Insulation strength: Field side – System side, ≤1500 VAC
Insulation resistance: Field side – System side, ≤100 MΩ
Product weight: approximately 100g
External Dimensions and Wiring Diagram APPEARANCE OF SIZE
Tianjin Ling Yu Technology Co., Ltd.
Operator:86-22-58554679
Fax: 022-58285528
Manager Ding: 86-18902041592
WhatsApp：8618902041592
Complaint Hotline:86-15822286986
Factory Address: No.5 Yingbin Road, Xiqing District, Tianjin
E-mail:sales@lingyukeji.com
Purchasing Department E-mail:lykj_tj@163.com
WhatsApp Scan
Copyright©2022 Tianjin Ling Yu Technology Co., Ltd