蒙自LPS-C2 Series Differential Pressure Switch
● Fully welded diaphragm, zero leakage
●Mechanical principle, no power supply required
● High-quality microswitch with minimal dead zone
● The process interface is versatile, and both flanges and threads can be customized.
Category:
Product Description
Product Overview Product overview
The LPS-C2 series differential pressure switches feature a diaphragm-type pressure-sensing element. The standard model can accurately control the pressure difference of non-corrosive gases, liquids, or vapors. The explosion-proof version is suitable for applications involving pressure differential control in environments with explosive gas mixtures classified as IIA, IIB, or IIC, and ranging from Group T1 to T6. With its all-welded stainless steel diaphragm design, the switch is simple to use, highly reliable, and minimizes the risk of leakage or malfunction. Additionally, the setpoint is adjustable, requiring no separate power supply, and the contact capacity is robust—making it ideal for on-site operation. This product is widely used in differential pressure control applications across industries such as petroleum, chemical processing, metallurgy, power generation, sugar production, and pharmaceuticals.
Measurement Principle Principle
A diaphragm-type pressure switch is a mechanical pressure switch that uses the mechanical deformation of a diaphragm to control the closing or opening of electrical contacts. When the pressure of the measured medium changes, the diaphragm undergoes a corresponding displacement. This displacement is then transmitted via a linkage mechanism to a microswitch. Once the displacement reaches a preset value, it actuates the microswitch, causing its contacts to either close or open—thus signaling the pressure level. Adjustable pressure switches allow users to fine-tune the relationship between the linkage mechanism and the microswitch contact travel, enabling precise pressure control at either a fixed value or within a specific range, thereby achieving the desired operational purpose.
Performance Metrics TECHNICAL PARAMETERS
Measurement medium: Gas or liquid (For highly corrosive applications, please consult us).
Measurement range: 0–2.0 to 2500 kPa
Working viscosity: ≤10E3 m²/s
Housing material: Die-cast aluminum, epoxy resin coating, with a sealing gasket on the outer cover
NEMA Protection Rating: Meets NEMA 4X requirements
Set value accuracy: ±0.5%
Repeatability accuracy: <1%
Pressure interface: Standard 1/2 NPTF internal thread, M20×1.5 external thread; special interfaces available upon request.
Electrical interface: M20×1.5 internal thread; special interfaces available upon request
Switch output: One single-pole double-throw (normally open + normally closed) output;
Switching component: Microswitch
Ambient temperature: -40°C to +70°C
Environmental humidity: 5%–95%
Cycle Life: 1 million cycles
Protection Rating: IP67
Explosion-proof rating: Exde IIC T6 Gb
Dust Explosion Protection: ExtD A21 IP66 T80℃;
Contact capacity: Standard type: 380V, 15A; Explosion-proof type: 380VAC, 5A;
External dimensions APPEARANCE OF SIZE
Installation Requirements INSTALLATION
1. Do not operate with power on.
2. Weld the pressure-tapping pipe, and it’s best to install a shut-off valve on the pipe, allowing for easy removal of the valve during maintenance.
3. Install the switch in a location with minimal vibration and temperature fluctuations.
4. Please do not turn the housing-fixed switch directly; instead, use a wrench to loosen the hexagonal connector below.
Tianjin Ling Yu Technology Co., Ltd.
Operator:86-22-58554679
Fax: 022-58285528
Manager Ding: 86-18902041592
WhatsApp：8618902041592
Complaint Hotline:86-15822286986
Factory Address: No.5 Yingbin Road, Xiqing District, Tianjin
E-mail:sales@lingyukeji.com
Purchasing Department E-mail:lykj_tj@163.com
WhatsApp Scan
Copyright©2022 Tianjin Ling Yu Technology Co., Ltd