Product display
LPS-N2 Smart Pressure Switch
● Multiple-channel digital output
● Display pressure values directly on-site
● Supports delayed alarms
● Set action values with buttons
Key words:
Classification:
Download information:
Product Description
Product Overview Product overview
The LPS-N2 series electronic pressure switch is a next-generation, intelligent product capable of collecting pressure readings from on-site pipelines and pressure vessels. It features local display, switch-action output, and remote signal transmission, making it convenient for downstream control systems to gather data. The local switch control output comes in the form of dry-contact SPDT or PNP/NPN switching signals, while the analog output supports 4-20mA current signals. Compared to mechanical pressure switches, this model offers exceptional ease in adjusting setpoints. Additionally, it allows users to configure multiple alarm modes, including single-point alarms, alarms triggered within the upper and lower limit ranges, and alarms activated outside these ranges. This versatile product is widely used in industries such as petroleum, chemical processing, metallurgy, power generation, sugar production, pharmaceuticals, and other sectors where precise pressure control is essential.
Performance Metrics TECHNICAL PARAMETERS
Power supply: 18–32 VDC, typical value: 24 VDC
Measurement media: oil, water, gas, and other media compatible with stainless steel;
Measurement ranges: Negative pressure type: -0.1 to 0 MPa; Differential pressure type: 0–2 kPa; Positive pressure type: 0–60 MPa; (Custom options available for higher requirements)
Measurement accuracy: 0.25%FS, 0.5%FS; (Higher accuracy available upon request)
Overload Capacity: 2x Full-Scale Pressure:
Analog output: 4-20mA;
Switch outputs: 2-channel PNP/NPN switches; optional 1-channel relay (SPDT)
Contact capacity: 24VDC 1.5A;
Load capability: Current type ≤500Ω, voltage type ≥250kΩ;
Threaded interface: G1/4; M20×1.5 (customizable based on site requirements);
Electrical interface: M12×1 connector;
Temperature Drift Coefficient: Within the specified operating temperature range, for every 10°C change in ambient temperature, the output variation is ≤ ±0.05% of the full scale; annual drift < ±0.3%.
Long-term stability: ±0.1%FS/year;
Housing material: Die-cast aluminum, epoxy resin coating, with sealing gasket
Housing Protection: IP65
Operating temperature: -20～85°C
Storage temperature: -40～100°C
Relative humidity: 0–95% RH
External dimensions APPEARANCE OF SIZE
Installation Requirements INSTALLATION
1. The pressure switch can be directly installed on the component being tested. To facilitate installation and maintenance, it is recommended to add a shut-off valve between the component and the pressure switch. In environments with significant vibration or shock, a flexible hose can be installed at the pressure switch connector to achieve mechanical decoupling.
2. A sealing ring should be installed between the pressure switch connector and the pipe fitting or shut-off valve. For flush-head pressure switches, the internal thread depth of the pipe fitting or shut-off valve must exceed 25 mm.
3. In general, the pressure switch should be installed vertically, facing upward relative to the horizontal surface. During installation, use a wrench to tighten the controller by turning it clockwise from the hexagonal nut located at the bottom of the pressure switch.
4. When the range is less than 100 kPa, it must be installed vertically.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Product inquiry
If you are interested in our products, please leave your e-mail, we will contact you as soon as possible, thank you!
Tianjin Ling Yu Technology Co., Ltd.
Operator:86-22-58554679
Fax: 022-58285528
Manager Ding: 86-18902041592
WhatsApp：8618902041592
Complaint Hotline:86-15822286986
Factory Address: No.5 Yingbin Road, Xiqing District, Tianjin
E-mail:sales@lingyukeji.com
Purchasing Department E-mail:lykj_tj@163.com
WhatsApp Scan
Copyright©2022 Tianjin Ling Yu Technology Co., Ltd