No data
Product display
The LF-19X wedge flowmeter is a flow measurement instrument designed based on the differential pressure principle. Its core component is a V-shaped or wedge-shaped throttling element, primarily used to address the challenges of measuring flow rates for "dirty fluids" such as high-viscosity liquids, fluids containing solid particles, and substances prone to scaling. This makes it an ideal solution that overcomes the common issue of clogging found in conventional differential-pressure flowmeters like standard orifice plates and Venturi tubes. The product features the following characteristics:
● Wide applicability: Particularly adept at measuring high-viscosity or impurity-laden fluids such as crude oil, asphalt, pulp, and mud; also suitable for use with conventional gases and liquids.
● Strong anti-clogging capability: The wedge-shaped throttling element features no sharp dead corners between itself and the pipeline, preventing solid particles or viscous media in the fluid from easily accumulating, thus extending the maintenance cycle.
●Low installation requirements: The length of the straight pipe sections required upstream and downstream is significantly shorter than that for standard orifice plates (typically just 5D upstream and 2D downstream, where D represents the pipe diameter), saving valuable installation space.
View Details +
● Wide applicability: Particularly adept at measuring high-viscosity or impurity-laden fluids such as crude oil, asphalt, pulp, and mud; also suitable for use with conventional gases and liquids.
● Strong anti-clogging capability: The wedge-shaped throttling element features no sharp dead corners between itself and the pipeline, preventing solid particles or viscous media in the fluid from easily accumulating, thus extending the maintenance cycle.
●Low installation requirements: The length of the straight pipe sections required upstream and downstream is significantly shorter than that for standard orifice plates (typically just 5D upstream and 2D downstream, where D represents the pipe diameter), saving valuable installation space.
LYA-J Detection Terminal Isolation Safety Barrier
The LYA-J series isolation safety barrier primarily serves to provide isolated intrinsically safe power voltage to transmitters located in hazardous areas, while also isolating and converting the 4–20mA signals generated by the transmitters before transmitting them to control systems or other combined instruments in safe areas. It ensures that hazardous signals cannot leak from the intrinsically safe terminals into the hazardous environment, and it maintains electrical isolation among the power supply, input, and output circuits.
View Details +
LT20 Series High-Precision Temperature Transmitter
Suitable for applications requiring high temperature stability and accuracy, it supports the HART protocol and allows instrument settings to be configured using a handheld operator.
View Details +
LPT-C Series Differential Pressure Transmitter
Suitable for measuring the flow, level, density, and pressure of liquids, gases, or steam, it converts the measured differential pressure value into a 4-20mA current signal output. It can measure, display, or remotely monitor static pressure, featuring quick response, remote setting capabilities, and self-diagnosis functions. This product boasts the following characteristics:
● High-performance monocrystalline silicon core
●24-bit high-precision ADC
● Wide range of transferability
● Can be configured via HART handheld device
● Dual Compensation for Circuit and Core
● Output damping is adjustable
●Equipped with an ultra-low temperature drift type (20 ppm/℃ typical)
● Equipped with RS485 functionality (please specify when ordering)
View Details +
● High-performance monocrystalline silicon core
●24-bit high-precision ADC
● Wide range of transferability
● Can be configured via HART handheld device
● Dual Compensation for Circuit and Core
● Output damping is adjustable
●Equipped with an ultra-low temperature drift type (20 ppm/℃ typical)
● Equipped with RS485 functionality (please specify when ordering)
LPT-F Diaphragm Pressure Transmitter
Suitable for measuring the pressure of liquids, gases, or steam, as well as the liquid level in open containers, this device converts the measured pressure value into a 4-20mA current signal output. It can measure, display, or remotely monitor static pressure, featuring quick response, remote setting capabilities, and self-diagnosis functions. This product boasts the following key features:
● High-performance monocrystalline silicon core
●24-bit high-precision ADC
● Core and Circuit Dual Compensation
● Can be configured via HART handheld device
● Suitable for level measurement in open containers
● Output damping is adjustable
● Equipped with RS485 functionality (please specify when ordering)
View Details +
● High-performance monocrystalline silicon core
●24-bit high-precision ADC
● Core and Circuit Dual Compensation
● Can be configured via HART handheld device
● Suitable for level measurement in open containers
● Output damping is adjustable
● Equipped with RS485 functionality (please specify when ordering)
Tianjin Ling Yu Technology Co., Ltd.
Operator:86-22-58554679
Fax: 022-58285528
Manager Ding: 86-18902041592
WhatsApp：8618902041592
Complaint Hotline:86-15822286986
Factory Address: No.5 Yingbin Road, Xiqing District, Tianjin
E-mail:sales@lingyukeji.com
Purchasing Department E-mail:lykj_tj@163.com
Business License
WhatsApp Scan
Copyright©2022 Tianjin Ling Yu Technology Co., Ltd